SECO reaming tools

Drill reamer PREMUS, 5 × A11, TiAlN

High-performance drill reamer: drilling and reaming in one operation.

Design:

- with 2 drilling cutting edges and 4 reaming cutting edges

- specific grinding

- point angle 140°

- side rake angle 30°

- solid carbide micrograin 10-12% Co

- TiAlN-coated

- with twisted cooling channels

Use:

drilling and reaming in one operation without any loss of reaming quality. The two drilling cutting edges initially process the solid material, the four reaming cutting edges then carry out the finishing. Very good surface quality. Optimum roundness, maximum alignment accuracy and coaxiality. For blind and through holes. Suitable for example for positioning holes in cylinder heads, crankshafts or gearbox housings. Can be precisely regrinded.

Technical characteristics:

• [A11] Cutting diameter, min. mm: 10.01
• [A12] Cutting diameter, max. mm: 10.02
• [A3/B2/B4] Usable length mm: 45.99
• [B3/B4/B5] Total length mm: 103
• [B6] Chip flute length mm: 61
• [C3] Mounting diameter, machine side mm: 10
• [C4] Shaft length mm: 40
• Mounting form, machine side: 6535 HA-Shaft
• Coating [H5/COATN]: TiAlN
• Drilling depth [A11 x D]: 5 × A11
• DIN standard: DIN 6537
• f mm/rev: 0.140-0.450
• Coolant leak [H22/CXSC]: true
• Material: solid carbide
• tip angle: 140